- Joined
- 16 Mar 2016
- Messages
- 12
- Reaction score
- 0
- Country
Hi All,
We moved into our house about 6 months ago and are slowly renovating. We removed the old header tank and hot water tank as we want the rook space, wanted the airing cupboard back and wanted on demand hot water all of the time. So, installed a WB combi.
We are about to replace the whole bathroom but i'm concerned about the water pressure and flow upstairs.
I've measured around the house;
Secondly, is this going to be enough to power an overhead rain shower (i'm installing good quality Kohler and Mira fixtures) and wall spouts?
Appreciate your input. Thanks.
We moved into our house about 6 months ago and are slowly renovating. We removed the old header tank and hot water tank as we want the rook space, wanted the airing cupboard back and wanted on demand hot water all of the time. So, installed a WB combi.
We are about to replace the whole bathroom but i'm concerned about the water pressure and flow upstairs.
I've measured around the house;
- Downstairs (main feed) cold is about 3.5 bar and 12-14 ltrs per min. When you turn the hot on it drops to about 2 bar and 8 ltrs per min.
- Upstairs I get from the cold about ltrs per min and 2 bar, dropping to about ltrs per min and 1-1.5 bar when the hot is on
Secondly, is this going to be enough to power an overhead rain shower (i'm installing good quality Kohler and Mira fixtures) and wall spouts?
Appreciate your input. Thanks.