I am fitting a number of fused switched spur outlets that will be connected to the following two items:
1) 4 x 20w 12v Halogens on a 50w to 150w transformer with a "the bathroom switch":
http://www.sensor.co.uk/BathroomSwitch.htm
and a inline "Bikkel" dimmer:
http://www.sensor.co.uk/Bikkel01.htm
2) A shower fan light as follows:
http://www.micromark.co.uk/epages/m...4000d6668273f0a020f650629+EN/products/MM30089
connected via another bathroom switch:
http://www.sensor.co.uk/BathroomSwitch.htm
I have the option in my loft to connect these to my 2.5mm ring main or to my 1.5mm lighting supply thats in the loft. I have two questions:
a) Which supply should I connect the spurs to ?
b) What size fuse shall I use on the fused switched spur ?
I was going to connect it to my ring main and use 1amp fuses but thought I would post on here to check that this is correct !??
1) 4 x 20w 12v Halogens on a 50w to 150w transformer with a "the bathroom switch":
http://www.sensor.co.uk/BathroomSwitch.htm
and a inline "Bikkel" dimmer:
http://www.sensor.co.uk/Bikkel01.htm
2) A shower fan light as follows:
http://www.micromark.co.uk/epages/m...4000d6668273f0a020f650629+EN/products/MM30089
connected via another bathroom switch:
http://www.sensor.co.uk/BathroomSwitch.htm
I have the option in my loft to connect these to my 2.5mm ring main or to my 1.5mm lighting supply thats in the loft. I have two questions:
a) Which supply should I connect the spurs to ?
b) What size fuse shall I use on the fused switched spur ?
I was going to connect it to my ring main and use 1amp fuses but thought I would post on here to check that this is correct !??