I know it sounds like a silly question but let me explain.....
I've fitted a new kitchen and i lay 18mm ply under the units (this was done so that after the new tiled floor was laid it would all be level). Unfortunatley the ply sticks out from the units a little too much and i need to cut them back whilst they're on the floor.
The original flooring (under the ply) is normal floorboards. The best i can think of at the moment it an angle grinder but sounds a bit OTT.
Jigsaw wouldn't work neither would circular saw and i'm not going to do it with a hand saw.
Any suggestions would be great.
Thanks
I've fitted a new kitchen and i lay 18mm ply under the units (this was done so that after the new tiled floor was laid it would all be level). Unfortunatley the ply sticks out from the units a little too much and i need to cut them back whilst they're on the floor.
The original flooring (under the ply) is normal floorboards. The best i can think of at the moment it an angle grinder but sounds a bit OTT.
Jigsaw wouldn't work neither would circular saw and i'm not going to do it with a hand saw.
Any suggestions would be great.
Thanks