I have a "Bosch PBH 2000 RE SDS Rotary Hammer Dril" (http://www.amazon.co.uk/Bosch-2000-Rotary-Hammer-Drill/dp/B000RW024A/ref=sr_1_1?ie=UTF8&qid=1319127682&sr=8-1)
I need to drill a hole through plaster for the dryer's air; the bit through the brick is already there, there is already a storm protector on the other side. I just need to make the hole inside the house and put a pipe basically.
For the job I suppose I need something like : http://www.toolstop.co.uk/bosch-2608584811-sheet-metal-holesaw-102mm-p9764 (is this for metal though? If so, I suppose it should should work for plaster the diameter i need is slighlty over 100mm, so 102mm is good)
now what bit do I need to fix that holesaw on my PBH SDS rotary hammer drill?
I can't really find out....
Thanks for helping a diy newbie!
I need to drill a hole through plaster for the dryer's air; the bit through the brick is already there, there is already a storm protector on the other side. I just need to make the hole inside the house and put a pipe basically.
For the job I suppose I need something like : http://www.toolstop.co.uk/bosch-2608584811-sheet-metal-holesaw-102mm-p9764 (is this for metal though? If so, I suppose it should should work for plaster the diameter i need is slighlty over 100mm, so 102mm is good)
now what bit do I need to fix that holesaw on my PBH SDS rotary hammer drill?
I can't really find out....
Thanks for helping a diy newbie!