Wireless Panic Button

Joined
24 Nov 2013
Messages
67
Reaction score
1
Location
Hampshire
Country
United Kingdom
Hi wondering if I can fit a Wireless Panic Button to my wired alarm system for my home. Any help would be greatly received.

Kind Regards
Al
 
Sponsored Links
Sponsored Links
Pyronix UR 2 and HUD-WE ,but as mentioned this would not be cheap.
You can program the keypad with a panic function by pressing 1&3 together. You will need the engineer code for this.
 
Wireless Panic Button
Needs to be fail safe,

Does the wireless panic button send regular "No panic link test" messages at regular intervals ?
Will the panel react if these test messages fail to arrive at the panel ?

Much easier to be fail safe when it is a wired panic alarm.
 
Needs to be fail safe,

Does the wireless panic button send regular "No panic link test" messages at regular intervals ?
Will the panel react if these test messages fail to arrive at the panel ?

Much easier to be fail safe when it is a wired panic alarm.
And reed switch’s in panic buttons can stick …..
 
And reed switch’s in panic buttons can stick …..
True, two in series reduces the risk of the panic button not going open circuit

There are alternatives to reed switches such as forced disconnection switches where an insulator is forced between the two contacts

A very simple but almost 99% fail safe "switch" is achieved when pressing the button snaps a fragile wire ( blue blocks are terminals )
snap wire EMS.jpg
 
Pyronix UR 2 and HUD-WE ,but as mentioned this would not be cheap.
You can program the keypad with a panic function by pressing 1&3 together. You will need the engineer code for this.
Do they work with the UR2-WE now?
 
How do you test that after installation?
The panel will ( should ) show "No Panic Activated" which proves the loop is intact,

One has to design the item such that one can be certain the wire will be snapped if the red plunger is pressed.

A bit like testing a box of matches. test each match before sale or ensure the matches are manufactured correctly.
 
Bernard stop living in fantasy land pa buttons have been reed switches or micro switches for the last 30 years
 
How do you test that after installation?

You can wire it in series with a resistor, the panel tests continuously to ensure a certain resistance is presented, within a tolerance, if the tests fails, it triggers an alarm. Another way is to have a diode in series in the button, feed it with ac - dc coming back proves the button, nothing or ac coming (shorted wires) back triggers the alarm.
 
Ok so that seems to be the receiver sorted, what about a transmitter (panic alarm button itself). Any suggestions please.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top