wires to short for new consumer unit..

[dingodeano]

when replacing a consumer unit and finding the wires for a number of circuits to short would it be acceptable to use junction boxes? or replace cable ?even if it means chasing out a lot of plasterwork ? thoughts?? especially NIC guys.

 

[ban-all-sheds]

especially NIC guys.

Why?

So you know whose advice to be wary of?

 

[ad13]

get a spark to change the boad and he will use insulated crimps so there is no need to chase cables back into the wall.

 

[ricicle]

especially NIC guys.

NIC or not, the right way is the right way.

Replace cable is the ideal solution.

Junction boxes fine if they remain accessible

Properly made crimped/soldered joints if not accessible (or accessible)

 

[ban-all-sheds]

A small enclosure with DIN rail and terminal blocks is a neat solution

 

[RF Lighting]

I'm an ex NIC guy if that is any good (I left through choice BTW)


I agree with Ricicle and B-A-S