Need some advice, I have just purchased an electric hob and integrated electric oven to match my new kitchen. They have wiring as follows:-
1. The hob has wiring with no 13a plug, the wire is T&E and appears to need to be wired directly in to the wall terminals.
2. The oven has a 13a plug connected.
My problem is the old cooker is wired directly in to the wall, which is switched above the worktop with a cooker switch and leads back to the CU protected with a 32a MCB. So this is a dedicated circuit.
Can someone advise the best and safest way to wire both my new appliances in to the existing circuit. I have read a lot of articles most of which give conflicting advice.
1. The hob has wiring with no 13a plug, the wire is T&E and appears to need to be wired directly in to the wall terminals.
2. The oven has a 13a plug connected.
My problem is the old cooker is wired directly in to the wall, which is switched above the worktop with a cooker switch and leads back to the CU protected with a 32a MCB. So this is a dedicated circuit.
Can someone advise the best and safest way to wire both my new appliances in to the existing circuit. I have read a lot of articles most of which give conflicting advice.