WMA 30 challenge

[gower2008]

I've a WMA 30 with a drum paddle thats come off. I can replace the lifter but it appears that a metal clip that might have been fitted to the heater element has come off. and is floating around loose

Will I be able to refit the clip, thru. the holes exposed by the missing paddle without dismantling the drum assembly, or will I just shred my hands on the sharp edges . . .

and is there a picture anywhere of what the fitted clip should look like

 

[rocks1]

no you cant fit the matal clip though the hole it is a heater bracker. heater needs replacing rear of mc remove lower panel and heater is in front of you 3 wires, 1 10mm nut remove black sump underneath to remove bracket good luck