I'm fitting oak block worktops in my kitchen, they currently have square cut edges. Do I need to buy/hire a jig and make a butt and scribe (is that right) joint for the corners, or should I make a straight joint and then round the edge with the router? Any advice welcome!
P.S. The worktops are 640 mm - I've not found a router jig that has 640 mm as an option, can a 650 mm jig be used?
P.S. The worktops are 640 mm - I've not found a router jig that has 640 mm as an option, can a 650 mm jig be used?