Hi. I've posted this on another forum so you may have seen this elsewhere but I've always got good advice from here so posting in both.
I have fitted a U shaped kitchen with a return on one side of the open end (so more 90% of a rectangle really).
I intend to fit 40mm square edged beech worktops using butt joints.
I have a few questions to be honest but my first one is -
Am I best using the dog bone shaped cut outs on the underside with the long bolts or is there another way.?
If this is the best way, do I need to hire a jig or can I just rout elongated T shapes in matching positions 20mm deep?
Thanks
Jim
I have fitted a U shaped kitchen with a return on one side of the open end (so more 90% of a rectangle really).
I intend to fit 40mm square edged beech worktops using butt joints.
I have a few questions to be honest but my first one is -
Am I best using the dog bone shaped cut outs on the underside with the long bolts or is there another way.?
If this is the best way, do I need to hire a jig or can I just rout elongated T shapes in matching positions 20mm deep?
Thanks
Jim