Hotpoint FDW60 dishwasher

Joined
17 Mar 2009
Messages
9
Reaction score
0
Location
East Lothian
Country
United Kingdom
I keep getting flashing lights 4 & 5 when the machine stops before completing a wash cycle.
I have tried manually draining the inside of the machine and clearing waste and inlet hoses also cleaned filters.
very close to giving it a good kicking as its 13 months old and I am losing the plot with it
Please can someone help me

Thanks
J
 
Sponsored Links
lights 4/5 is time out filling is the hose pipe kinked .
 
Sponsored Links
that means error 5/6 . tip mc on side remove base 6 screws and remove pump its blocked on the impellor side .follow drain hose to pump if you dont know what it looks like .1 screw holding it on then twist off pump.
 
SH!T
thats sounding technical
is it easy? what do I do after I remove pump?
dont fancy sitting with thing in bits when wife returns home
cheers
J
 
easy 10 min job ,when the pump is out flick a screw driver in the big hole in the pump .to turn the impellor round ,its jammed with something small .
 
ok done that running 65 degree wash but gurgling sound when on
Im not feeling so confident.................
any thoughts?
 
was there anything in the pump .does it drain when you put it onto another prog .
 
Ran the prewash and everything worked
now on 55 degree wash but gurgling noises coming from machine
HEEEEEEEEEEEEEEEEEEEEEEEEEELP
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top