Recent content by 1stassetelectrical

Maybe the meter will be too close to gas? Not too sure what else they could be having problems with.

don't get me going on laminate flooring put a load down at ours 2 weeks ago now her who must be obeyed wants new ouside lighting so up its coming lol Why do we bother lol

Hi there, not too up on em either but have fitted a couple of wired ones, The reasoning behind was I kn ow in the old days and maybe still the wireless ones could be jammed where as the wired ones can't. I think I got the last one from Macro but it was a good one for about £100 Paul

As above, and as for the rolled up bit, Many years ago was welding on etension lead which was only unrolled a little and guess what happened? A it melted lol ALSO SOME EXTENSIONS ARE ON 0.75MM CABLE. Paul

the wiring problem is in the loop of the light that works ok, you have connected the live to the perm on light to the supply side instead of the switched side. if you can identify the wires going to the one thats perm on there the red or brown depending how old cable is needs connecting to the...

it can be done but you need expert advice from someone who is prepared to look into everything or whom already has the expertease in this, the pump, heaters and airpumps could be out of the zones easy enough and if the tank is built into the wall as long as there is no access from the bathroom...

Hi sounds like the fitting that is on constantly is being powered by the permanent live rather than the switched live. search using google (other search engines are available) for loop in light wiring diagram should be able to see where you have gone wrong with that. Paul