23vc's latest activity

  • 2
    23vc reacted to noseall's post in the thread Rebuild brick wall with Like Like.
    No self-respecting builder would touch it with that hedge and the effect it could have on the wall. Plus you need to factor in the...
  • 2
    23vc replied to the thread Rebuild brick wall.
    If the entire wall is now at an angle, then surely that means the foundations have moved due to the hedge, and pointless rebuilding off...
  • 2
    23vc replied to the thread How to install PIR Upstand for UFH and Screed.
    It’s not an issue, as the screed isn’t the finished floor. The little bit of visible perimeter insulation gets covered by a combo of...
  • 2
    23vc replied to the thread Thermalite 3.6n.
    See it all the time, it will be a yes
  • 2
    23vc replied to the thread Weep vents positioning above a steel lintel.
    Did the opening get widened? Looks like the blocks have been cut (although may just be the photo) and guess they just left the old...
  • 2
    23vc replied to the thread Weep vents positioning above a steel lintel.
    The weep vent height may be ok if there’s a cavity tray at that height, but wrong if they’re relying on the (cavity) lintel as a tray...
  • 2
    23vc reacted to noseall's post in the thread Rafters and external Leaf with Like Like.
  • 2
    23vc reacted to noseall's post in the thread Rafters and external Leaf with Like Like.
    They are a great tile to work with too.
  • 2
    23vc replied to the thread Rafters and external Leaf.
    I mendip’d mine, mine was also fairly shallow but was at least 17 for the velux’s. dead easy tiles to lay unlike the Anglias on the...
    • 1775897239456.png
  • 2
    23vc replied to the thread What foam gun?.
    I’d say any gun has the ability to either self destruct or get clogged, so I’d just buy the usual basic screwfix ones. Think my current...
  • 2
    23vc replied to the thread Rafters and external Leaf.
    Surely your top roof has a gutter overhang so this one can have a couple of inch verge overhang? Pitch looks shallow but may just be...
  • 2
    23vc replied to the thread Joists for extension.
    This kinda thing where it’s built in/cut into the brickwork. I guess for yours, if you’re matching an existing first floor level for...
    • 1775678353424.png
  • 2
    23vc replied to the thread Joists for extension.
    I did the bearer plate on mine, as didn’t fancy chopping each joist out. No issues. But suspect it’s seen as the less robust method out...
  • 2
    23vc replied to the thread Weighing in copper.
    Yeah it’s all very above board now, they don’t even pay cash…
  • 2
    23vc reacted to stuart45's post in the thread Weighing in copper with Thanks Thanks.
    It's so the Council know who nicked all their signs and drain covers.
Show older items
Back
Top