Recent content by aaf

I think they are copper. But I'll check. Good idea!

CBW - Yes. gas112 - Yes.

Hi, Thanks for the response, but I've tried that. As I explained the 3/4" pipe is smaller than normal and the 3/4" olives are too loose. Usually a 3/4" pipe is about 21.5mm (external), mine are 21.1mm. I'm thinking about swaging it. But I'd have to buy a swaging tool, heat treat the pipe to...

Hi, I'm trying to connect 3/4" copper to 22mm copper in an old house. However it appears that the 3/4" is actually slightly smaller (measured at 21.1mm) than it normally is. This means I've been unable to use the special 3/4 to 22mm compression fittings as the olive is just too loose. Similarly...

Ok, thanks for your help. I'll try that first.

Hi CJ, Thanks for replying. Do you mean the switch in the stalk? I would have thought that that would tend to only affect signalling in one direction and wouldn't tend to cause the speed to vary. Does that make sense?

Hi, The indicators on my wifes Nissan Micra (2000S) have started to behave eratically. They sometimes work ok but sometimes they go fast then slow or stop working all together. I suspect that this may be due to a faulty relay but am not sure. I don't want to buy a replacement and then find...