Abyone's latest activity

  • A
    Abyone reacted to Mottie's post in the thread Disassemble Bed with Thanks Thanks.
    Are they wood screws? Sometimes there are metal inserts that a threaded screw goes into. In the worse case scenario, you could fit...
  • A
    Abyone replied to the thread Disassemble Bed.
    Yeah I've tried all that. It's built from a Poliform Ando bed. ( Not made anymore ) The metal frame and components were salvaged but the...
    • 20260520_182454150.JPG
    • 20260520_182421783.JPG
  • A
    Abyone replied to the thread Disassemble Bed.
    Ultimately everything can be undone but my question was always around reassembly. If the screws are threaded into wood I am afraid I...
  • A
    Abyone replied to the thread Disassemble Bed.
    Photo 3
  • A
    Abyone replied to the thread Disassemble Bed.
    Yep I think that's it, Thanks.
  • A
    Abyone replied to the thread Disassemble Bed.
    No, it was a good few years ago, I don't have their contact details anymore and they closed their business and moved to another country !
  • A
    Abyone replied to the thread Disassemble Bed.
    Thanks. But dangerous to assume! It was actually made on site by a carpenter / veneer specialist. They used the template of an...
  • A
    Abyone replied to the thread Disassemble Bed.
    Yeah that is obvious, unfortunately doesn't help me though. Coming apart isn't my main concern - I just have to keep unscrewing and I...
  • A
    Abyone reacted to stevie888's post in the thread Disassemble Bed with Thanks Thanks.
    My daughters house when bought had quite nice hardwood flooring in the bedroom......except for the bit the bed had sat on. OP make sure...
  • A
    Abyone reacted to johnny2007's post in the thread Disassemble Bed with Thanks Thanks.
    Start removing bolts from the head board. If it doesn't come apart it means it's been glued. Then I wouldn't dismantle it.
  • A
    Abyone replied to the thread Disassemble Bed.
    Yes I know. I have never undone or put together something this big before hence my apprehension - don't want to cock it up and then...
  • A
    Abyone replied to the thread Disassemble Bed.
    You can see the light and the same screw in the main photo of the bed.
  • A
    Abyone replied to the thread Disassemble Bed.
    Does the fastener in the middle of the pic going into the frame look familiar to anyone - I am guessing it supports the floating shelf...
    • 20260520_182807556.JPG
  • A
    Abyone replied to the thread Disassemble Bed.
    Ok thanks. I didn't want to overload the thread with photos but having said that, the photos probably show nearly all there is to see...
  • A
    Abyone replied to the thread Disassemble Bed.
    If I knew that I wouldn't be asking ?
Show older items
Back
Top