Recent content by AC427

My quote was wrong. I was meaning if they were by-passed. But I have taken onboard your comment and will seek out an RGI

Since I bought the place the system has always been like this. was an ex-rental property. Had real problems with flow when 1st moved in. Had never been properly maintained with an inhibitor. Sytem pipework is 22mm flow and return down into 8mm micobore for the flow and return legs. But...

Fitted a new pump but still the same thing.

The gate valve has been adjusted a number of times to see if it is a flow problem. On drain down, the colour of the water is clear, but I have added a de-scaling agent a couple of days ago. I have err bypassed the overheat cut out and high and low thermostats on the pretence that it maybe...

On initial fire from cold heat does go through the cycliner coil on hw selection for 10 minutes before the boiler cut out and does it fire up for 45 seconds cut out for two minutes routine. A bypass has been fitted in the form of a 15mm reduction from the 3-port valve via a gate valve.

Hello I am having problems with an Apollo Fanfare 30/50i. It will fire up for approximately 10 minutes then cut out, then fire up again for about 45 seconds then cut out again, repeating this. The heating system is a microbore system thinking this was a flow problem and have flushed this...