Recent content by adamdamienlynch@gmai

I was thinking that expanding form would not be a good idea when it come to services and inspections. I was considering making a plasterboard insert with some vent holes in it, instead of the gaping hole that is currently there. Thoughts?

I have a gas boiler, glow worm r25 and I have noticed a cold breeze coming from outside, this is definitely stronger on windy days and is present when the boiler is not it in use. My question is can is seal this up with hi temperature expanding form or is this a no, no. Pictures in thread

Thanks so much for all your help, its probably best to have the option for a future upgrade to hot water control.

Yes, I got the one with the heating & Hot water controller "Hive Thermostat for Heating & Hot Water (Conventional Boiler) with Hive Hub - Energy Saving Thermostat" The other option was the combi boiler model. Is this correct do you think?

I have ordered the conventional hive system with the hub. I will keep the thread updated on how the upgrade goes. Thanks for all you help.

There is a water pump under the stairs but it is only inline with no other controller.

I had a look and there is only an old school click timer for the immersion, but we never use it and it is all set to "off". We rarely need just hot water as we have electric showers. So I'm not to bother by not being able to control it separately.

That's all I have. The wireless controller, receiver and boiler. And yes, it is a energy 25r.

I have a Honeywell EHE0200361 and the controller has finally died. The auto/manual/ off buttons don't work, I stripped it down and found residue on the board around the buttons. I cleaned it up and it worked fine for a fews weeks but it has finally died. I am going to toss it and upgrade to...

Sorry. New here. I might just copy and paste this in to a new thread.

Sorry for bumping this again. I have a Honeywell EHE0200361 and the controller has finally died. The auto/manual/ off buttons don't work, I stripped it down and found residue on the board around the buttons. I cleaned it up and it worked fine for a fews weeks but it has finally died. I am going...

Fixed, there was some residue on the buttons , cleaned it up with some alcohol on a swab. Now it works perfectly. Thanks a million.

Could do, I have some contact cleaner. Might give that a go.

No luck, the first step is to put the controller into "off" mode. Mine is stuck in "auto", tried it regardless. It did turn the display off for a second but nothing else happened. Still stuck in "auto".

Hi all, I have a Centre EHE0200361 and its stuck in auto mode. I can't turn if off or on to manual. I can change every other setting. I tried taking the batteries out over night, no luck. It works fine but I can't turn it on manually. I tried all the manuals and now where does it have a hard...