Recent content by Alan 483256

  1. A

    Cable size for two ovens and a hob from extension CU with 6mm supply

    XKCD has a comment to make about this today... https://xkcd.com/3211/
  2. A

    Boiler fused spur and power cut

    Do you have anyway to check the boiler will run on a portable power supply before forking out for one? Some require an earth connection that the portable power supply might not supply. Something to do with flame-detection I believe, no doubt someone with more knowledge will comment.
  3. A

    Woolwich man jailed for dangerous gas fitting in Croydon

    Israel Jackson, from Sandbach Place in London, installed a boiler at the home of a 90-year-old man in Croydon in May 2022 despite not being registered or qualified to do so. He was sentenced to 12 months in prison after pleading guilty to contravening gas safety regulations...
  4. A

    Is this article a Red Haddock ???

    It's the "Red Haddock" option, and they're often dangerous as well .... https://www.which.co.uk/news/article/illegal-and-potentially-dangerous-energy-saving-plugs-still-widely-available-aRj6E8g6e7AX
  5. A

    Lagging for an external condensate pipe

  6. A

    Lagging for an external condensate pipe

    I've been looking at Armaflex, and both Class 0 & 1 specs say they need to be painted or covered for UV protection. I might just try getting the normal stuff again and painting it.
  7. A

    Lagging for an external condensate pipe

    Yeah, there is a trace heater under the lagging now and that works fine. I'm just having real trouble sourcing UV resistant insulation to fit. You say painting it is an option - never even thought of that. Just with normal exterior paint?
  8. A

    Lagging for an external condensate pipe

    Not this one, it HAS frozen - before the lagging+heater was fitted.
  9. A

    Lagging for an external condensate pipe

    Can someone point me in the direction of the correct lagging for an external condensate pipe? After mine froze up a few years ago, I fitted a strip heater and lagged it and it's been fine since. BUT the lagging has deteriorated badly, I'm guessing from UV exposure. What's the correct product to...
  10. A

    Blocking off an unused 13 amp double socket

    I think not..... https://www.which.co.uk/news/article/throw-away-your-dangerous-plug-protectors-right-now-aRuwt5l3SxKQ
  11. A

    Instant hot/boiling taps for the kitchen

    This is a 9 year old thread!
  12. A

    Loud rushing pumped water tank

    Not connected to the noise you're hearing, but flexible connectors are not supposed to be used like that. They're supposed to be almost straight - to adsorb vibration. Not tightly curved to connect up the piping.
  13. A

    Core drill ?

    Really? - I've never ever given this a thought. Don't even know if my SDS drill has a clutch, how do I tell?
  14. A

    Flood lights - can anyone recommend a really good make/model that lasts more than a couple of years?

    I bought a couple of Phillips floodlights a while ago, haven't really had them running for long enough know how good they really are but they've already outlasted the previous 'MEIHUA' ones! Here they are - https://www.amazon.co.uk/dp/B0DQQ7SS3N?th=1 (They're available with PIR as well)
  15. A

    How best to minimise boiler noise?

    Our boiler is mounted in a cupboard actually in the bedroom. Can hardly heard it. The pipes creaking as they expand make more noise. It's an ideal logic max c30.
See more
Back
Top