Recent content by alanduncan

:lol:

Thanks Lads ,for your info i have someone out on Monday to have a look at it,I will post it up here if they find something,ps there was a wee air block i got rid o that

Thanks DP, as vokera help line told me it could be the pump, and i did not want to spash out on a new pump if it was ok

Thanks Tony, looks like ill need to get a ARGI man in, to have a look.The boiler outside the house in a leanto. If i put the HW only on and look underneath i can see the pin going in and out like a steam train, i take it its ment to come out and stay out or not come out at all, so you doint...

Thanks Tony went back out for a look . When i put the hotwater only or the CH with the clock off The arm moves and switch clicks, then all of a sudden heard lots o clicks from the control box, looked under and the flow switch was moving in and out all the time and the Pressure and the flue...

if it is the pump, would i be right in thinking it would be about £80 for a new one and how easy are they to fit for a spark with limited knowledge of boilers

the pump only stops when i change from CH to HW only, when the CH is on and i run the hotwater ,the pump keeps running. When i run the heating or HW,with the water on the fulcrum moves and makes the switch, but the one below it doint come out. Im not sure what the Venturi is in a boiler,is...

I have no hot water when i set the boiler to hotwater only ,just with the Heating on, so have to have it on low for 24 hours. I replaced the Domestic Diaphragm and the smaller diaphragm below it. But still no hotwater when heating cuts out. When i Switch to hotwater only i hear the pump stop...