Recent content by Aligas

That's not just cheap, it's giveaway. I don't know how they can be making any money at that level?

Hi all, I'm an established gas engineer/plumber and have recently gone into business with the only decent builder I have worked with. We have a decent volume of work but we're looking to expand, and want to get a number of crews on the go at once. As such, we need to get a decent amount of...

Hello all, some directtion required: Yesterday early am (still semi conscious!) I spilled a hot cup of tea down myself and the front of my Hotpoint WD865a washer dryer. Ever since, turning it on trips the RCD. I spent a short while trying to dry it out but it still trips out although now at...

Can see from your pic that the basin waste is also connected to the stub stack - check depth of the water seal in the basin trap. The flushing of the wc may be sucking the water from your basin trap and allowing the pongs into the house through there. If this is the case, the simplest option may...

Check that when the burner was put back together once the new motor was fitted that nothing is fouling the fan, or that the fan itself has not been pushed too far onto the spindle and preventing it from firing. After all those bits having been changed, I'd check ignition transformer, electrodes...

Take a look at the grundfos macerator as an alternative to the saniflos, solo lift I think they're called. Different mechanism for grinding up the undesirables, easy to service/maintain as can be done with all sanitary ware in situ (depending on install). Uses a grinder rather than a...