Recent content by AlistairH

Yes, Leccy speaks wise words.... Disconnect the pipe from the switch at the top... You could then try and start a wash...if water does start flowing... then you know this is your problem. when i pulled my pipe off... you could hear to switch click as the vacuum was broken. do not let the wash...

ok...if it is not filling at all...and there is no water no to be pumped out, its deffo the problem I had. If you feel up to it, you need to - take the top off. Then unscrew the 4 screws on fromt top left where the soap tray goes. Be cafeful then takeing front off with ribbon cable. - Then take...

ok... it is a clear pipe from the bottom front of the drum up to a pressure switch, top right. You need to take the front of the machine off. Is your machine not filling?

Fixed it myself! -blocked tube to pressure switch

Bear with me! - Stopped with E15, check pipies. So I took black hose off, checked pump etc...all clear. also machine HAD emptied. cannot find blockage anywhere. Now the machine also does not take water in, goes through wash cycle with no water, then E15. Did some homework, and checked out water...