Recent content by Alwaysworking

Guys a couple of questions if you don’t mind. I’m due to change my router to the BT Smart Hub 2 and I understand that the wi fi will not function correctly as it will chop and change from 2.4 & 5.0 GHz, if I connect via an Ethernet cable, will I need to alter any settings on the panel to maybe...

Thanks secure, I've got passed the bit where the panel continues and the pad stops with the help of the Texecom help-desk, but now when I arm the system it's silent both on exit and entry, would prefer to hear a tone so you can hear it on exit/entry, if that makes sense. Thanks again.

Could someone advise as to how I get the sound back on when arming the system, had a problem with it staying on, altered the zone for an entry/exit as its a front door, now when arming there is now sound? Thanks AW

I was under the impression that the lid had to be removed and the engineering lead to the keypad had to be used, which was a pain as the panel is a little out the way, turns out you don’t . I’ve got everything set up as much as I know, but when I set the alarm the keypad times out after 20...

Thanks again, back on it this evening, can I ask if removing the keypad allows me to enter engineering mode to save me having to remove the panel lid?

iPhone and the sync seems to have sorted that one, thanks for your help. Do you know if the bell box needs to go on any specific zone? Cheers

Okay, that worked but only gave brief time then said failed to log in, ensure you are using the correct code.

Thanks for the response, I’ve tried the other user codes on the system and none of them work, it still sends the notification when I work on it, just won’t allow me to use the app.

Hard going this, should have stuck with Risco. Can anyone tell me how: I alter the exit time, Does the external bell have to go on a specific zone And any idea why the app is now saying this is currently disabled. Thanks for any help.

Another quick one if you don’t mind. Can I add devices at a later date from the user menu or do I need to enter engineering mode. Thanks

Okay, done exactly what I’ve been doing and it’s now registered.

Help if you don’t mind guys... Have fitted loads of wired alarms and decided to upgrade mine to the above, really can’t be much to it, so I thought. Installed panel, went through all the checks with pir/ locations, eventually found what the small lead with the keypad was for, just cannot get...