Recent content by am2411

  1. A

    Framed shower screen bottom not sitting flushed with the tiles

    Yes you are right, something straight upfront means less disappointment later- Thank you so much Rob!
  2. A

    Framed shower screen bottom not sitting flushed with the tiles

    "Correct"- This is right- If the shower enclosure/glass/door is there as part of the design then the fall should be contained within the footprint of the enclosure and the tile around the edge should be level to the screen, if so then it would be a snagging issue. And yes I would not like...
  3. A

    Framed shower screen bottom not sitting flushed with the tiles

    That gap is a lot for a silicone to fill in unfortunately.
  4. A

    Framed shower screen bottom not sitting flushed with the tiles

    Yes whole floor is tiled and you echo all the points that I had thought of too 1. There is tile slope to manage the water flow, but water still splatters everywhere and I see this gap as a place where no brush can get and gunk will start to collect in there (I do not like the idea of such a...
  5. A

    Framed shower screen bottom not sitting flushed with the tiles

    Yep I am in Australia.
  6. A

    Framed shower screen bottom not sitting flushed with the tiles

    May I please seek your advice on the framed shower screen that is installed by the builder in new built house (yes not a diy job hence not suitable oreganos for this forum but I will value your input). Framed shower screen installed in two bathroom that shows same problem. The inside of the...
See more
Back
Top