Recent content by Amir El-Bakary

  1. A

    Clay Roof Tiles laid below Minimum Pitch

    Felting over the battens would be a lot easier. It just seems a bit “bodged” to me. You going over the counter battens would be ok? would you pull the membrane right or let it drape between counter battens? would you just cut the klober above eaves trays?
  2. A

    Clay Roof Tiles laid below Minimum Pitch

    Looks like we are are gonna remove the counter battens and lay a layer of Klober permo extreme membrane - sealing joints and using butyl tape to seal any nail holes. Then counter batten & batten as normal…
  3. A

    Clay Roof Tiles laid below Minimum Pitch

    That looks like it would solve the issue. And would save removing and and getting new tiles delivered. We would need 5 rolls of the stuff though - costing an extra £2000! Have you ever laid tiles at a lower pitch than recommended, without the extra membrane, and been ok?
  4. A

    Clay Roof Tiles laid below Minimum Pitch

    Afternoon Everyone, We are currently installing a new roof. The roof tiles being used are Sandtoft Rivius Slate Clay interlocking tiles (minimum pitch specified is 22.5 degrees) We have now noticed that the pitch of the roof is 18 degrees. Roof construction is 22mm sarking boards, Roofshield...
See more
Back
Top