Recent content by Andy B 23

Hello Looking to remove moss and lichen from a bungalow roof, the bungalow is detached so access all around is not an issue, the smaller section of the roof is accessible from the garage roof. I am looking for a method if possible that does not involve walking on the tiles, something I can...

Hello In the process of buying a 1960's bungalow. The property has 2 stacks, a tall stack that services the fireplace in the lounge, a gas fire is currently in place but we are looking to remove this. The second stack is much smaller & goes into the kitchen, finishing before floor level, the...

Currently looking at options to replace an old copper tank with header tank in loft. Electric heating at the moment plus electric shower. Currently 1 sink in kitchen & 1 sink in bathroom, possibly fitting a second bathroom in loft so potentially 1 more sink & bath/shower. Options: Unvented...

Thanks Ericmark. Lots to think about when we move, definitely looking into solar as a serious option.

Thanks Ericmark. Noted re unvented cylinder. We currently have a gas fire in the lounge. We are at home as well during the day so selective heating would be our strategy as well. We are going to get a quote for a traditional wet system with a combi which will allow us to remove the old...

Thanks Muggles, I note that Fischer are not the best company in the world. The house already has a gas supply currently being used for the hob & gas fire in the lounge. We will be looking at getting quotes for a central heating system, the boss is not a fan of underfloor heating so a...

Good evening We are currently purchasing a 1960's 3 bed detached bungalow. At the moment it is heated by a mix of old storage heaters & some much more modern electric style radiators made by Fischer. The hot water is provided by an old copper emersion tank with a header tank in the loft...

Good evening Looking for some guidance. Currently in the process of buying a bungalow which was built circa 1970. The concern is a step in the brickwork 2 courses up, it runs from the front of the garage to the back of bungalow, as it gets towards the back of the bungalow it tapers back in...

I am considering changing my heat only unvented system for a combi, the set up is follows: 3 Bed detached house constructed in 2011, 50mm slab insulation boards in the cavity (traditional masonry internal & external skin walls). Potterton 12 SL Promax heat only boiler. Family bathroom: bath...

Hi Andy, thanks for taking the time to respond. Due to the current demand from the boss for the heating to be available 24/7 I was not able to carry out the full drain down, mains flush & inhibitor re-fill, as soon as the weather/boss will allow I will fully drain down & re-fill adding X100.

Thanks Madrab, much appreciated.

Hi Madrab thanks for taking the time to respond. The system is S plan with an unvented Santon Premier Plus 170 litre cylinder. Manual bypass, LS valves fitted to both flow & return on rads in hallway & landing. Manual bleed on on the common return in the airing cupboard, AAV on the flow above...

I have a Potterton Promax 12 SL, it is the original boiler, installed in 2011, it is in good order & has just been serviced with no issues found. My system is S plan, I have a Grundfos alpha 2 pump which had been left on fixed speed 3, after some experimenting this has now been changed to PP2...

You reference a metal filter is your preference, as I only have 130mm between the 22mm elbows on the horizontal pipe many filters are too big, you referenced a TF1 as being a good piece of kit, after researching I found the FERNOX 62248 TF1 OMEGA FILTER SLIP SOCKET CONNECTION only requires a...

Thanks DP, yes if this boiler was in Yorkshire I am sure it would have worn out by now, thankfully the milder climate in Devon means that it is not on 24/7.