Recent content by Angus!

You think 10%, I'm using 4x4 posts with 6m lengths cut down for 6x2 beams all round, then 4x2 rafters I'm having the rafters spaced at around 500mm with least amould of fixed sheets of 5mm polycarbonate for roof and small gutter length C & D , thanks for your help, the structure is free standing...

hi Notch Thanks for your reply, Yes fall is perpendicular, Minimum angle is say 3 degrees, its just really the minimum for water to run off Plastic sheet roof I to the gutter, Yes A and C are 90 degrees, Thanks for your help

Hi all hope someone can help me with my calculations, I'd sunk the posts for a pergola but as I've gone all grand designs I decided this shape would look good, especially with the polycarbonate tinted roof, however the conundrum is what is the minimum difference in height for a&b to c&d for the...

Hi all, Just looking for a bit of advice I've recently purchased a house and the basement area I would like to convert into a kitchen. It's a terrace house built on a slope so the basement opens up to the garden. There are some issues im concerned about and would like some advice. I'm...