I’d be surprised if it’s a sludge problem but you never know. You would tend to get the boiler kettling if water was struggling to circulate though. You would definitely hear this happening.
Not sure on your exact boiler model but some of these only have a small back boiler that is enough to heat a hot water storage cylinder and maybe one or two small radiators. Try shutting some of the radiators off and see if the heating is improved on the others. I suspect it will be.
You’re probably trying to run too many radiators off it. Sounds as if the boiler is too small to heat them all to a reasonable temperature. Is there another gas boiler on the system too or is it just this one?
Been a very interesting read Keith. You certainly have some stock of determination!! Glad it all worked out in the end and long live the ‘hybrid’ one off box. Happy new year!
Yeah, I’d leave it at least overnight for it to cure. A full 24 hours would be better. Depends on the type of silicone used and the bead thickness. Thicker beads take longer to cure.
SOLVED!
A few weeks ago I’d moved the wiring loom out of the way whilst welding the rear cross member, I’d mistakenly plugged the towing loom back into itself and bypassed the cars indicator on the right hand side, thus it wasn’t getting the signal to activate the relay. Several hours later the...
Please can anyone enlighten me as to the meanings of these abbreviations on the pins of this relay? I think it’s gone faulty and was hoping to replace with a new one. Trouble is I don’t seem to be able to source a like for like too easily, so have ordered a universal one. I’m hoping it will...
I don’t have personal experience but I’ve heard that the dryer part of the system will need replacing when a system has been ‘open’ for a while as it will be saturated with moisture.
Looks as though the eBay ones would work. You could shorten the 15mm tails to suit also. If the cone on the 3/4 connector was different, you would have to adapt to the correct valve with one of these
You could get some 1/2” steel pipe threaded at the correct length and use in conjunction with a 1/2” socket. Similar to this picture. You would need to paint after though. Lots of plumbers should have facility to cut and thread this stuff.
Evening folks,
I would appreciate some advice on replacing the titled drive with another suitable one please. If I buy the same make and model but with a different ROM VER will it still work? Does it need to be from the exact same laptop?
Thanks for any advice.
Paul.
It’s part of the standard refilling process I believe. They should put a vac pump on to check for leaks anyway, or they’ll be wasting their time and gas, and possibly your money. Not to mention the release of damaging gas to the ozone!
Not the actual shower valve, but maybe the pressure equalising valve normally fitted just before the shower valve. If there is one? But yes that’s how you would check it. Any sort of flow would potentially reduce dhw temp. Just something that’s easily ruled out.