Recent content by Antoniokra82

Hi All I am looking to do my new conservatory base. I will do 1mt of concrete for the footing and 50cm for the floor base. I am looking to put the Damp Proof membrane and the insulation but I am hoping I can avoid the MOT and just do cement? Thanks in advance Antonio

I couldn’t find any motorised valve but I have the supply for the water heater on a fuse spur. Can I just not “steal” the neutral from it? This is on the same supply of the programmer and the boiler

Another chapter to the saga. I started to look everywhere in the house and opened every cupboard when I found this junction box next to the water heater. And connected to nothing I have found the blue cable. I have buzz it and it is the one going to the thermostat. Unfortunately I have the same...

Yes, the programmer is always on. Also I have tried to check for continuity between the junction box next to the programmer and the thermostat and I don’t have anything so I am wondering where are the cables coming from.

L and N 20 L and SL 220

I know Stem. I have test voltage between line and earth and I have 240v

Is this the wiring centre? Because if it is I don’t have cable from here going to the Thermostat

No, the junction box is 6/7 away from the thermostat

I checked every wire and honestly it seems very weird as I have only one 4 cores cable going up in the ceiling. I will try tonight to buzz them with a long lead but I am pretty sure that is not my cable. I don’t want to start to lift floor boards up to see where the cables are going but I will...

Hello, I am back Unfortunately my experiment didn’t work. I have buzzed the cables from the junction box with the one in the thermostat and none of them worked so I couldn’t bring the neutral to the thermostat. Now I’m stuck, I have found a power socket close to the stat, I was wondering if I...

Thanks Chris Wish me luck

I understand. What will happen if at the junction box I disconnect the blue cable from the connector block and wire it with the neutral block and at the new thermostat I have the live, the neutral and Switchlive (and the link)?

I have tried but it is not working, when I test voltage between live and neutral (at the thermostat) I have only 20v, this is why I believe I don’t have neutral. Do you know what is the purpose of the neutral cable at the Honeywell thermostat? Will the thermostat work with just live and Switchlive?

Yes, I have a hot water cylinder as well.

Thanks for your reply. The blue cable on the connector block as got a red sleeve (same as the yellow cable). My question is how the T40 thermostat is working: The link is between the the live and the switch live and every time the wheel is turned it opens and close the contact. So I’m this...