Arctic_Simon's latest activity

Thanks for the advice all. Like i say i will try next few showers with the door wedged and if works i will get to chopping the bottom door

I normally suggest 6mm or 1/4 inch

Ok so the steam did clear nicely with door ajar and there was no pooling of water / condensation in the edge of the extractor fan like i...

Try leaving the door slightly ajar to see

Ill try a shower with Stanley wedging it tonight

Just home. Looking at the gap at the bottom of the bathroom door it is very small. A couple of mm at best so might need to take some of...

Thanks guys. I will check if there is any gap under the door when I get home and ensure the window is closed while showering next time...

The key to the extractor are keeping the window closed, having sufficient air flow under the door and an over run timer Compromise on...

The shower is a bit to the right of the airflow, but generally the overall layout isn't that bad, (I've seen worse) provided that there...

Thanks for your detailed reply Stem. The spec of the fan says - 75m³/hr, 21 litres per second. I have added some more to the layout...

The minimum recommended air flow rate for a bath / shower room is 15 litres / second (Building Regulations Part F) but sometimes more...

Hi All, looking to replace the extractor fan (100mm) in my bathroom. My bathroom is long and thin and the shower is on the opposite side...