Ok so the steam did clear nicely with door ajar and there was no pooling of water / condensation in the edge of the extractor fan like i have seen previously (yesterday). I will try this theory again with next few showers and see how it gets on.
If i was to take some off the bottom of the...
Just home. Looking at the gap at the bottom of the bathroom door it is very small. A couple of mm at best so might need to take some of that off and see if improves things.
Thanks guys. I will check if there is any gap under the door when I get home and ensure the window is closed while showering next time. I guess if the duct is straight and not sloping downwards the condensation could be running back in (or blowing back in - I will check if it is windy next time...
Thanks for your detailed reply Stem. The spec of the fan says - 75m³/hr, 21 litres per second. I have added some more to the layout (door location and window). There is a window next to the extractor fan. It does have a timer feature which I leave on after the shower. The problem I am having...
Hi All, looking to replace the extractor fan (100mm) in my bathroom. My bathroom is long and thin and the shower is on the opposite side on the bathroom to where the extractor fan is (See attached crude drawing). I currently have the MANROSE CQF100T 100MM installed which replaced a none working...