Recent content by armouredsmiler

  1. A

    Geberit type 260 flush valve

    I think you find that there is either calcium build up or the silcone wahser has developed 'air pockets'. I would turn the water off to the cistern untwist off the valve and pull off the silci=one washer on the bottom check/clean/replace and refit to see if it fixes the issue
  2. A

    Concrete gutter leaking

    Back in the late 90's I had to choose what to do with our Finlock, back then there was less companies removing Finlock reliably (IE cold bridging also sorted), so we went for aluminium lining (that has been coated in some sort of resistant coating/paint), have not regretted it from the water...
  3. A

    Neighbours extension and soak away drainage system

    First of all I believe the act should be mandatory and enforcable by criminal law (that woulsd stop my neighbour in his tracks), it is weak as it stands. No I don't have a 'You have a dangerous misunderstanding of the act.' I am viewing this from the person who is not doing the...
  4. A

    Neighbours extension and soak away drainage system

    err, it is. Just the same (as I have found out from Thames Water) as building over public sewers and manholes less than 130. As per the party wall act leaflet by the government.........◦The Act contains no enforcement procedures for failure to serve a notice. However, if you start...
  5. A

    Neighbours extension and soak away drainage system

    Also not that the party wall act is only a optional act, IE it is not enforcable/mandatory only a suggestion by the government, so they don't have to pay for your solicitor if they don't agree to take out the act. 'Take a look at THIS - and the link to the explanatory booklet at the bottom...
  6. A

    Potterton Suprima tripping out

    Sorry, I assumed that the rule 10 was in reference to Great Britain where a gas safe engineer is required. Since the work is to be carried out in Northern Ireland where the Gas law only comes into force 1st April this year I thought it would be OK to ask this question? So if it is allowed...
  7. A

    Potterton Suprima tripping out

    Does anyone have the instruction on how to fit the new PCB replacement part 5111603 (includes fitting plate and wiring) in place of the old PCB 407750 as I have got hold of a replacement but it has no instructions on what wires go where (or are they all the same colour and connection to the...
See more
Back
Top