Recent content by arsenalb

Thanks for the info. I recall the 2 weights you mention and both are intact and tightly secured. Although i'm away from home for the rest off the week. So - i'll have a look at the dampers on my return? I couldnt get any movement between the drums -- so dont think its the bearings -- but if...

Thanks for the info. I recall the 2 weights you mention and both are intact and tightly secured. Although i'm away from home for the rest off the week. So - i'll have a look at the dampers on my return? I couldnt get any movement between the drums -- so dont think its the bearings -- but if...

thank-you. I Have tried the drums -- no movement. Springs are ok. I'm away from home until next week-end, on my return I will check the bottom weight and the dampers -- hope tha one of these is the problem...

This machine gave great service until lately, when during the spin cycle of the main wash cycle G it gives a few heavy thuds even with a light load. However with no load there are no thuds. Have removed top & back no obviuos mechanical fault. Is it the bearing/s going? If so, were can I get...