Recent content by arsenalfcfan

great. how do I check that?

The pump kicks in when the hose has been taken off of the pump (hot side). What exactly is wrong then? Pump must be ok maybe hose clogged up?

sorry let me write my last post again. Pipe from cylinder to pump is hot (normal) but from pump to mixer is not too hot, just warm to touch really.

the hot water cylinder is hot, it also feed other taps and they are fine. The pipe to the mixer from the pump is hot to the touch but no hot comes from the shower, well just a tiny tiny dribble. Nothing really at all.

it is lukewarm to the touch, not hot hot though.

the 2 inlets have been removed and the filter looks clean. I have washed it under a tap to be sure but they look fine. Could the problem be anything else??

there are 4 hoses from the pump. I have turned the lever valves to the pump off. Shall I unscrew all 4 of them?

ok thanks you. how do i check the filters (sorry i have never cleaned them out before). will theyh be at the pump somewhere or in the hose to the shower? or do you mean filters in the shower itself?

Our shower has no hot from it now, it started last night. Cold is ok. It is a mira shower, and has a pump behind the bath which kicks in when the shower is turned on. Could the pump be faulty? Is there a way I can make sure of this before replacing it?