Recent content by Autarch

Thanks. Item 7 on the drawing may be the tool I need to remove the flexis. I'm not sure what it is though.

Straight threaded adaptor would be 15mm female one and and 3/8 male or whatever the supplied flexis require to fit on the other side. If the flexis come off it must mean taking the brass insides out of the tap as the flexi nuts are screwed into it and a good 50mm up inside the chrome tap body...

Thanks for the replies. It's a bit ridiculous that the £5 tails can't be removed on a £150 tap. I wouldn't have bought it had I known. The 15mm valves are iso's but space is limited so I might have to reduce in soldered copper and install new 3/8 valves to fit the flexis to. Odd that...

Hi there. I'm trying to replace a leaky tap with a new Grohe Ambi monobloc. The new tap came with flexi tails with a 12mm coupling but my pipework ends in a 15mm service valve so I need to modify something. Ideally I would just like to change the flexis as the supplied ones are very long...