Thanks to everybody who helped, particularly to you rocks1.
I ordered a new PCB (actually not new, but repaired pcb) from the website suggested, and I changed it myself. It was quite straight forward after all.
Cost was about £50 inc VAT provided that you return your faulty pcb.
:)
Hello rocks1,
How easy is it to remove and fit a new PCB?
Also, PCB are quite expensive. Are you sure this will fix the problem?
If yes, I will change it (or get it changed).
Thanks.
Hello,
Unfortunately, they do not have the part ;(
I talked to an engineer who could open and diagnose the washing machine for 40 quids plus part : do you think that s the way forward???
Regards
I tested the relay (or what I believed to be: something right on the top where hot air is blown). I had 4.1v between the element and earth at the entry but I could not access the other end. I dont think I would get anything anyway as the relay would be ON only during drying process. The machine...
Thanks, it does help.
Apparently, problem would come from the dryer heater relay.
Do I have to trust blindly the code or is there any way I can double check the relay is faulty? Is that something I can replace easily?
Cheers,
Hello everybody (it s my first post here)
I have got all lights flashing on my washer dryer, indesit widl 146. Several times, I had just to unplug and replug and wait for a few hours. But it doesnt work anymore :(
I got it opened today to clean everything I could but it's still flashing...