Recent content by Banter10

Checked all connections and they seem fine. If I manually click the microswitch then it fires up the boiler so I can only presume its the motor gone in the valve. green/yellow - earth Blue - neutral grey - hot water off power orange - cylinder stat call white - room thermoatat call...

Checked all connections and they seem fine. If I manually click the microswitch then it fires up the boiler so I can only presume its the motor gone in the valve. green/yellow - earth Blue - neutral grey - hot water off power orange - cylinder stat call white - room thermoatat call...

Im at work at the min MANDATE but is there anything obviously wrong that you can see in this pic? Now I know that the grey wire is wrong as the brown wire is the one that has power when there is no call from the HW stat.

Hi MANDATE The blue is connected to neutral ok as everything is working fine on the HWside of things. I can manually move the lever no problem and this allows the flow to CH side but with the head removed from the body it still fails to operate correctly so I guess its looking like a faulty...

with HW and CH off power is at the grey wire only, with CH selected power is also at the white wire but the valve fails to move so Im guessing that means a faulty valve? Thanks for the info your giving MANDATE!

swapped the HWoff wire to the correct place and it still fails to fire up the boiler when CH is selected and the thermoatat is up. Any more help please?

Had a plumber out last week to fix a problem we had that the hot water was only getting warm which turned out to be a sticking mid position body. Now he changed the danfoss mid position valve for a tower one and that fixed the problem and he left with the heating and hot water both on and...