Recent content by Bazooka Joe

Need some advice/help please I'm trying to replace a Trevi CTV like for like. Removed the temperature control knob but struggling to remove the volume control handle. It wont budge. Any help will be much appreciated Thanks

Thats the one. Thanks jj4091

Can anyone identify the shower make/model in the photo please. I want to replace it with the same or similar so I don't have to rip the tiles off and modify the pipe work etc. TIA

@denso13 Thanks for the link. That's the one. Thanks to Wagner's and Matthias for advice

I want to replace the cistern float valve diaphragm washer but do not know the make of the valve. There is no manufacturers name on it. Anyone know what make it is? Many thanks for looking.

Finally stopped running

Closed cold water isolation valve and opened hot water tap but water doesn't stop flowing

Thanks again for your help and advice Ian

Chris and Ian Thank you for your help and the links. Probably a silly question, do I need to drain the system before dismantling the valve?

Hi All My Baxi Main 24 HE diverter valve is leaking at the front, just behind the micro switch. Please see attached photo. My question is can I replace the seal, if there is one, and is it a simple job? Thanks in advance

You're not much help are you?

That bad eh? Bit extreme.

Some weeks ago I fitted a new pump and had problems with water coming out of the overflow. It was suggested that I turned the pump speed down one notch which did solve this problem. However, the central heating is becoming very noisy with trickling water sounds in the rads, whooshing and banging...

Hi bster The old pump was 15yrs old. Turning the pump speed down on the new one seems to have worked!! Many thanks for your help.

Thanks. I'll try that and let you know.