Recent content by Bernie320

Strange, switch 4 isn't used?!! At least it's working I guess!

Just further to the above, setting of DIP 1 to ON will clear any ATS Path Faults you have, with the lid closed, if you don't have any faults with DIP switch 1 in the OFF position then there's no need to select it ON. If it's ON, if you were to take the cover off the GSM unit, it won't signal a...

Ensure Dip switch number 1 is set to ON, then the Com GSM will communicate regardless of whether the unit is in tamper or not. Connect the GSM to COM 1 on the control panel. Select Com Port 1 as GSM Module in the Panel Com Port Options area in the Radio-Pad and Com Port Options tab of the...