bettz1's latest activity

  • bettz1
    bettz1 reacted to sparkwright's post in the thread Adding a socket with Thanks Thanks.
    That looks much, much better. Well done.
  • bettz1
    bettz1 replied to the thread Adding a socket.
    Tidied the wires up all good now. And yes I know the socket will go off when the lights off but it's always on due to how dark it is.
    • IMG_20251123_162138.jpg
    • IMG_20251123_161310.jpg
  • bettz1
    bettz1 replied to the thread Adding a socket.
    Hopefully my dodgy wiring
  • bettz1
    bettz1 replied to the thread Adding a socket.
    The fuse spur has a 13a fuse in it
  • bettz1
    bettz1 replied to the thread Adding a socket.
    ;) The fused spur switches the light on, I did think is it only going to work when the lights on, but whenever I'm in there the lights...
  • bettz1
    bettz1 reacted to Harry Bloomfield's post in the thread Adding a socket with Thanks Thanks.
    If they are being pushed out, then it because they are not inserted far enough, to be squarely under the terminal screws. Your final...
  • bettz1
    bettz1 replied to the thread Adding a socket.
    Problem I had was when tightening they kept being pushed out
  • bettz1
    bettz1 replied to the thread Adding a socket.
    Tbh I got frustrated with it, not alot of room, couldnt get my fingers in I'll sort it tomorrow at least I know it's the wiring when I...
  • bettz1
    bettz1 reacted to sparkwright's post in the thread Adding a socket with Thanks Thanks.
    That wiring is AWFUL. Too much exposed copper, which would certainly cause the wiring to short circuit.
  • bettz1
    bettz1 replied to the thread Adding a socket.
    I'll trim them tomorrow it's hard to get the right length with such little space I don't know how sparkies do it. It was the only way...
  • bettz1
    bettz1 replied to the thread Adding a socket.
    I'll have another look tomorrow it's too dark now, I've switched the fuse off for the garage.
  • bettz1
    bettz1 reacted to terryplumb's post in the thread Adding a socket with Thanks Thanks.
    Some of the copper conductors are sticking out from the terminals ,there should be no visible copper. The red wire is hanging out of its...
  • bettz1
    bettz1 reacted to pete01's post in the thread Adding a socket with Thanks Thanks.
    You are probably catching something with the 3.5mm fixing pins
  • bettz1
    bettz1 replied to the thread Adding a socket.
    It seems to be tripping when I screw up the fuse spur
  • bettz1
    bettz1 reacted to pete01's post in the thread Adding a socket with Thanks Thanks.
    Post a pic of what you've done. What does the fcu do?
Show older items
Back
Top