Thanks for the reply.
With the setup I have, I don't think that's possible without spending a lot of money. There is
no easy way to get connections back to the pump or 3WMPV from the cylinder. So,
essentially, I am stuck with the setup I have. The main problem being how to deal with
the feed...
I should add, what I currently have is more like the S-PLAN on that linked
page.
i.e.
If boiler is on HW is always on.
If CH on timer is on, valve is actuated and water is allowed into the radiator circuit.
Basically, I want to use a cylinder thermostat to block the feed into the...
Thanks a lot for the reply. The problem I am trying to solve is the water in the cylinder
getting too hot (I am fitting a pumped shower which has a thermal limit to avoid
cavitation).
The cylinder is in the airing cupboard and has no connections back to the pump, wall
control unit or...
Hi there! (1st post),
I currently have an indirect cylinder which looks like it has been bodged in. It is currently
plumbed as follows:
There is some sort of very old physical thermostat plugged into the bottom of
the primary coil.
The feed goes into this thermostat.
The return...