Recent content by bigt

Bob, Finally found out cooker rating 4.3KW and hob rating of 6.4KW!I will be running a 10mm cable for the double oven (in case a freestanding appliance gets put in at a later date) and a 6mm for the hob.The 10mm going through a cooker control unit and the 6mm via a 45amp double pole switch.Have...

Bob, What is the accepted method to connect the hob and oven,both of which will be within 2metres of the CCU?Do I need to be running a 10mm and a 6mm across the house to feed them,as plugwash suggested.Should I use two 45amp isolators? Space is a bit limited on the wall and I don't really want...

The oven is a built under double circotherm forced air system and conventional top oven with grill,model no U1721 by Neff. I might end up putting two 45A single box switches into a dual flush mount split box,so I can isolate both independently.

Thanks Bob.have found out rating of hob=6200W max,unfortunately can't find oven rating as not arriving for 2 weeks!Neff web site doesn't show imformation.What threw me into confusion was a sparkie telling me I needed 2 10mm cables to feed the units.Can I just feed one cable to the cooker supply...

thanks for that. :) are these fused switches or just a double pole switch?

could this be one standard cooker isolator with/without a socket plus one small isolator which will fit into a single sized flush mount box?

doing a kitchen refit and same problem bodged electrics!only a ring main double socket on the wall.have been told i will have to feed 2 new 10mm cables across the house,one for the hob,one for the oven.does this mean i have to have two isolators on show in the kitchen?