Recent content by BJay

Aqualisa sent me the two O-rings (big one with filter, and small one for groove at back of cartridge) and I replaced these with plenty of grease, but nothing's really changed. With the temp on hot, the shower seems to work ok. If I turn off the shower and leave for some time (>1hr) and then move...

So I managed to fit an aqualisa blanking plug as mine had blown off - see http://www.diynot.com/forums/plumbing/aqualisa-aquavalve-60x-outlet-plug-assembly-installation.292843/#2131201 - fiddly job as hole in wall was pretty tight) - but that fixed that no problem :-) I also discovered the...

Thanks for reply - sounds like I could be following in your path on this - though I hope not ;-) I'll get the blank plug fitted and then hopefully I'll be able to see whether the cartridge is dripping or not. I assume you got the Aqualisa specific plug? It looks like a pretty generic bit to...

Hi - Did you sort this in the end, as I appear to have exactly the same problem, though it was several months after fitting a water saving valve that my shower blanking plug was blown off. Did the replacement part fix it? Was your cartrdige still ok - I'm not sure if I've also got drips...