Recent content by bluewispa

Hi i would just like to say thankyou for all the replies everything is now working fine after i replaced the motor. :D

O/k if its not the motor is there anything else i can do ? or do i just scrap it ?. The only thing i dont understand is how it can pack up from not being used for 2 months i dont think the motor is seized as i can turn it with the plastic part that the plate sits on.

Hi thankyou for reply yes that is what i mean the drive for the plate does not turn but the microwave works is it still safe to use ? is there anything else i can do if i take it apart ?.

Hi i have a goodmans microwave oven model GSS20 the plate no longer turns round i have checked the plastic part that the plate sits on and it's fine what else can i check ? is this trouble a diy job or do i need to buy a new microwave ?. Thankyou for any advice anyone has to give me.

Hi thankyou for your replies as there seems to be more to this job than i first thought i have decided not to go ahead with it i will save up my Penny's until i can afford to pay someone to do it. Thankyou again for all your advice.

Hi the cooker supplly is rated 45amp at the mcb. All i want is to have some power for lights and sockets to do a bit of diy stuff i thought it would be safe to run this from my cooker supply as i was going to use another cu. My plan was to use 6mm cable from the cooker supply to cu about 6m...

Hi what do you mean by csa ? the cable from the house fuse box is rated 45amp both cu have rcd protection is this the information you need to advise me ?. Thankyou for your help.

Hi all, i have a leanto which i want to run power to my plan is to use the cooker supply which is not being used and run a cable from there to a consumer unit which i have (wylex nh206/63) and from there run a strip light and 4 power sockets the unit is 2 way so i can fuse the light and power...