Hi there,
I would like to use the tag reader in the main panel - does this need to be enabled for use in a menu first before trying to add a particular tag & user? Hope someone can help - thanks.
.....and it all works! Out on interest, on the Enforcer display panel there is the letter "c" after the time - does anyone know what that is there for please?
PSU is a 3amp Elmdene with a 7Ah battery back up. I'm hoping to use the oem for a bit of home automation if I can suss out the programming. Thanks for your help.
Sorry - more questions (but I have used google!) So, I've now got an external 12v psu for the vocaliser and an oem8r8t module. Before I power up I'm looking for reassurance that I'm correct - for the oem wiring : on the 485 bus "in" I will have the d1,d3 & d4 from the 485 bus from the Enforcer...
If & when I fit an output module do I need to use special cable for the 4 wire bus and what would be the maximum distance it could be fitted away from the enforcer?..
I was probably only going for the smaller 8 relay Pyronix oem which I believe will need a separate psu with battery back up. As far as powering and triggering the vocaliser - are you saying that if I use a separate psu then it will trigger ok as long as the negatives from the panel and the...
Thanks for this. I was hoping to reuse my Pyronix vocaliser with my wifi enabled enforcer so I have a back up alert system using the pstn. I am already using a delta bell x in scb mode and an internal sounder so will be drawing about 170ma in alarm as it is. If i used a separate psu for the...
Can anyone confirm the max current you can draw from the 12v aux power connectors for wired bells, internal sounders etc please - not sure if 250ma or 500ma (not counting the power consumed by the unit itself) Thanks!
Can anyone suggest why there is nothing being displayed under the History tab on my Enforcer app? All seems to work ok and I get push notifications ok but the history section is blank - not a major issue but would be nice to get to the bottom of it. Thanks in advance. Bob