Recent content by bobbyv

It is a basic 105e, not the Instant.

Thanks for the response. The other thing i should note is that the Expansion Vessel failed 8 months ago and a 12L external vessel has been fitted on the return. I will check the pressure on the vessel but with the boiler off and the system cold the pressure gauge holds steady at around 1bar.

I have an ongoing saga with a Baxi 105e. New diverter valve fitted after having a lack of hot water unless the heating was running. Putting on a hot tap would result in the rads getting warm and luke warm DHW. New PCB fitted, pt no. 5112380, after diagnosing a problem where the boiler...