We're called Rattlesnake Jake. Mostly trad Soul, bit of Northern soul, some Chicago blues and couple of funk tracks. Mainly weddings and corporate but some pubs and clubs too. Just had a 3 week lay-off due to holidays and the like. First one back tonight, it's a sell out and I'm itching to play.
A stop gap solution would be to install a thermostatic mixer shower, pipe the shower cold feed to the main and fit a single impeller pump on the hot. Yes it would be noisy and you'd empty your cylinder pretty quickly but it would give you much better shower performance. You could also fit a...
I'm sure someone will tell me I'm wrong but if you're getting 18ltr per min at the cold mains fed bath tap it would suggest it's pipework/restrictions that are resulting in your poorer flow rates elsewhere rather than what's actually coming into the house.
There are pros and cons to every system. I play in a very busy band and I like to be able to have a shower if I want one if I get in at 3am. You can empty a smaller unvented cylinder pretty quickly. Whichever combi you go for (if you do indeed go for a combi) you'll need to up the gas. If you go...
I know I was shot down last time I said it but a combi really will be your most cost effective option imho. I don't think you'll get the benefits of an UV cyl given your current incoming main even with the upgraded pipe. You could always add a small unvented cylinder to do the bathrooms at a...
The point you seem unwilling to see is that everyone who has replied ultimately has YOUR best interests at heart.
On the Homeserve cover; time how long the engineer is in your house for. 20mins tops I guarantee it. Do you really think they'll carry the gaskets with them? These guys are probably...
Which boilers modulate below 6KW (combi or system)? Again, not a challenge but a question. Do you not think it worthwhile to range rate the high output of a combi to suit the requirements of the system? I understand that low levels of circa 3KW could be desirable, but to my knowledge, are not at...