bobred's latest activity

  • B
    bobred replied to the thread Reuse existing circuit.
    Hi, yeah this is what I would like to do. Thanks
  • B
    bobred reacted to JohnW2's post in the thread Reuse existing circuit with Thanks Thanks.
    OK - so, yes, you can still use the daisy chain and, if you're getting rid of the control panel then again, yes, you could connect the...
  • B
    bobred replied to the thread Reuse existing circuit.
    The daisy chain was connected to the loop of the Kentec fire control panel, the radial powering the control panel.
  • B
    bobred replied to the thread Reuse existing circuit.
    The original alarms were connected in a daisy chain using the twin core and earth. So connecting the radial from the CU to this daisy...
  • B
    bobred replied to the thread Reuse existing circuit.
    The existing cable is twin and earth, there was no interconnect used on the original circuit, each alarm was addressed.
  • B
    bobred replied to the thread Reuse existing circuit.
    So I had a look at the cable and it says BS7629-1 300/500V. The base blocks of the alarms have L E N and an I interconnect, but the...
  • B
    bobred replied to the thread Reuse existing circuit.
    Hi. I will supply some photos. The sensors are analogue addressable Hochiki sensors and have a +ve and -ve and an earth and rated at...
    • 20250617_110100.jpg
    • 20251111_132751.jpg
  • B
    bobred posted the thread Reuse existing circuit in Electrics UK.
    I have recently moved into a property that was used as a small care facility. It has a fire alarm system and hochiki low voltage sensors...
Show older items
Back
Top