Recent content by Bonjo Gonzo

Thanks. Plain and clear. Would I need a new receiver too?

Hi, Im back as the issue is not resolved as I thought / hoped. The boiler ran ok on Sunday but when the bolier went off, it did not react to the later setting that I had set and remained off just like before. I have changed the batteries again just in case they are being drained (l dont think...

I agree CBW. I don't quite understand it as with the cheap batteries, a signal was definitely reaching the receiver. When I did a reset on more than one occasion, I was sitting next to it at when the timer kicked in, I watched the green light come on and also heard a click at same time in the...

Thank you EVERYONE for your time, it really is appreciated. Agile, Im over the moon, you have solved my problem and I wish I could buy you a drink (if that's your thing). I had brand new batteries in the timer and they are Alkaline. This removed the low battery symbol so I thought all was...

Or this one

Here is the picture. Thank You

The heating knob was on 54 so have turned this up to 64 but still no joy. When you say join the 2 wires up to get the heating on. If I turn the power off and open the receiver is it obvious re. the 2 wires and by doing this am I bypassing the timer so becomes a manual set-up? Do I need new...

Spelling mistake noted. There is nothing under the parcel tape and the issue was prior to the tape being put there (I was a bit heavy handed). Thank You

I did not mention that the little flame symbol is flashing as it should on the timer when the boiler timer is set to be on.

Hi, I have a Valiant Eco Tec Pro boiler that was installed some years ago. I currently have an issue with Central Heating not turning on. When I press the i button, getting s.30 code (room thermostat is blocking heating mode). The timer is set correctly, has new batteries and no...