Recent content by bootsam

I have 1No bayonet gas connection. Currently the oven and hob are electric. I want to replace these with gas fueled items. Does the gas hob connect to the gas oven and then the oven connect to the supply? Or do I need another spur? Ta

Really? Cool. I did not know that. Thanks. I dont mind working waterside, but gasside I leave well alone. I have an allergy towards explosions. Cheers once agian Kev.

I bought the diaphram from :- www.thegasworkscompany.co.uk [email protected] The kit came complete and assembled. Shut off all mains power, water etc. Isolate the appliance. Work in a ventilated space. Well lit and no smoking. Be sensible it is a gas appliance and it has...

It was the diaphram on the flow divertor. It was split. I have DHW now, I changed the diaphram instead of the whole valve once i found out i could get the diaphram for a fiver and the valve would cost £65!!! I have a manual, including the spares catalogue. i will scan and post it on a free...

It was the diaphragm. It was split. I sourced a replcement on ebay for £5. fitted it and she runs DHW perfectly now. many thanks kev.

Kev, Manual recieved, once again many thanks for your help. :O)

I appreciate that, thanks. I have ordered a new flow diverter. I used mole grips last night to simulate flow, to enable me to run a bath. I have someone coming to fit a new boiler next week so i only have a few days of being smelly to cope with. The boiler is old anyway and needed replacing. I...

Kev, Any chance I could get a copy too? :D

bump

Thanks Kev, I have emailed you.

My Ariston EuroCombi STYX 20MMFICE has developed a problem. I have CH but no DHW. I neeeeed a bath. Ive narrowed it down to the flow switch, i think. On the valve there is a set of 3 microswitched above a rod which i guess which activates the switches. If i remove the microswitches and manually...

Me neither I have the same problem. Lol. I neeeeed a bath. Ive narrowed it down to the flow switch. If i pull the rod on the valve, i get flow to the secondary and thus hot water. However my rod isnt rising to switch the flow. I know where the diaphram is so I will replace that, but i dont know...