Recent content by BPO

  1. B

    How to deal with space between fascia and wet cast render

    Should I fill the gap between fascia and render with expanding foam or mastic, such as, Everbuild Everflex 115 GP Building Mastic, or something else?
  2. B

    Garden red stone chips - dirty with mud (Ed.)

    Sorry if a daft post but just wanting to ask if anyone else has come across my situation and found a solution. Recently bought a house and all the garden areas and drive are red stone chips, but over time a lot of dirt, soil and debris has got in amoungst and it looks quite dirty and clogged...
  3. B

    Floor insulation

    For thermal and noise benefit, considering insulting under floors in single storey 1930s property, brick cavity wall (filled). Important factors: - not sufficient crawl space to work underneath, so need to do from above. - timber T&G floorboards. - soil solum. Original plan was simple: 1. Loft...
  4. B

    Old damp proof holes in bricks

    Sorry, new to forums.
  5. B

    Old damp proof holes in bricks

    Pinenot- if brick construction, and drill holes behind skirting which I’m assuming had a chemical DPC inserted in the past, what should I fill holes with? Loose wool insulation? Lime putty? Cement? Something else? Thanks
  6. B

    Internal chemical dpc holes - what to do?

    Thanks. Size about 20mm diameter. I had been thinking woodwool or lime mortar to prevent any moisture issues? Try to stay away from foam - I just can’t control it ☺️ and been advised not to use unless no other option due to its non breathability.
  7. B

    Internal chemical dpc holes - what to do?

    1940s bungalow with brick cavity walls that appear filled. Removed skirting and found lots of drilled holes just above timber floorboards - presumably created by chemical dpc application in the past. What should I fill these holes with before refitting skirting, that will not create an issue?
Back
Top